Acids Bases Ionization

Introduction

Acids and bases have been defined many times and in many ways. Numerous scientists have suggested various definitions for acids and bases, some of which are highly specific and others of which are quite broad. We come into contact with acids and bases on a daily basis. Except for water, every liquid we used had acidic or basic properties, such as vinegar (acetic acid), soft drinks (carbonic acid), buttermilk (lactic acid), and soap (contains base). The initial definitions were based on the flavour of the substance and how it interacted with other substances.

Ionization of Acids

The degree of ionization is a measure of the acidity or baseness of an acid or base. A strong acid completely ionizes in water, whereas a weak acid only partially ionizes. Because acids have varying degrees of ionization, they also have varying degrees of weakness that can be quantified. The ionization of a weak acid is an equilibrium process.

\[HA{\rm{ }}\left( {aq} \right){\rm{ }} + {\rm{ }}{H_2}O{\rm{ }} \to {\rm{ }}{H_3}{O^ + }\left( {aq} \right){\rm{ }} + {\rm{ }}{A^–}\]

\[{K_a} = \frac{{[{H_3}{O^ + }][{A^ – }]}}{{\left[ {HA} \right]}}\]

The Acid Ionization Constant is defined by the Equilibrium Constant for the Ionization of an Acid \({K_a}\). The higher the acid ionization constant, the stronger the acid. As a result, a strong acid donates more protons than a weak acid. Because the concentration of the product is in the numerator of the Ka constant, the larger the acid ionization constant, the stronger the acid \({K_a}\).

Ionization of Bases

Strong bases are bases that completely dissociate into their ions in an aqueous solution, such as lithium hydroxide or sodium hydroxide. As a result, the ionization of these bases produces hydroxyl ions, which are represented by the symbol \(O{H^ – }\)

\[B{\rm{ }} + {\rm{ }}{H_2}O{\rm{ }} \to {\rm{ }}O{H^–} + {\rm{ }}B{H^ + }\]

\[{K_b} = \frac{{[O{H^ – }] + [B{H^ + }]}}{{\left[ B \right]}}\]

\({K_b}\) is the abbreviation for the equilibrium constant for base ionization. As a result, a strong base indicates that it is a good proton acceptor, whereas a strong acid indicates that it is a good proton donor. Weak acids and weak bases dissociate in water as follows:

\[C{H_3}COOH{\rm{ }} + {\rm{ }}{H_2}O{\rm{ }} \mathbin{\lower.3ex\hbox{$\buildrel\textstyle\leftharpoonup\over{\smash{\rightharpoondown}}$}} {\rm{ }}C{H_3}CO{O^ – } + {\rm{ }}{H_3}{O^ + }\]

\[N{H_3} + {\rm{ }}{H_2}O{\rm{ }} \mathbin{\lower.3ex\hbox{$\buildrel\textstyle\leftharpoonup\over{\smash{\rightharpoondown}}$}} {\rm{ }}N{H_4}^ + \left( {aq} \right){\rm{ }} + {\rm{ }}O{H^ – }\left( {aq} \right)\]

Neutralization Reaction

When an acidic solution is treated with an alkaline solution or aqueous solution of a metal oxide, a salt is formed, and the solution becomes neutral. A neutralization reaction occurs when \({H^ + }\)ions from an acid combine with \(O{H^ – }\)ions from the base of a metal oxide.

The chemical reactions shown below demonstrate the formation of salt.

\[HCl{\rm{ }} + {\rm{ }}NaOH{\rm{ }} \to {\rm{ }}NaCl{\rm{ }} + {\rm{ }}{H_2}O\]

Daily life substances are arranged according to their pH values.

\[{H_2}S{O_4} + {\rm{ }}Ca{\left( {OH} \right)_2} \to {\rm{ }}CaS{O_4} + {\rm{ }}2{H_2}O\]

Summary

The term “ionisation degree” also refers to the proportion of neutral particles in aqueous or gaseous solutions that are ionised to form charged particles. It could be defined as an acid’s or a base’s ability to ionise itself in electrolytes. A low degree of ionisation is sometimes called partially or weakly ionised, while a high degree of ionisation is called fully ionised. However, a fully ionised state can also indicate that an ion has used up all of its electrons.

Arrhenius’ theory states that an acid is a substance that dissociates in an aqueous medium to produce hydrogen ions. A base, on the other hand, is a chemical that produces hydroxyl ions in an aqueous medium. Arrhenius’ hypothesis is especially important in understanding acid and base ionisation. This is because ionisation occurs frequently in watery media. The degree of ionisation of an acid and a base can be used to determine their strength.

Frequently Asked Questions 

1. What do you mean by the Ionisation of acids and bases?

Ans. The degree of ionisation is proportional to the acid or base strength. A strong acid or base is said to completely ionise in water, whereas a weak acid or base is said to partially ionise.

2. Why acids are considered the opposite of bases?

Ans. As acids increase the concentration of hydronium \({H_3}{O^ + }\) in the water while bases decrease it, acids and bases are considered opposed. The reaction between an acid and a base is referred to as “neutralisation.”

3. What effect does ionisation have on pH?

Ans. The concentration of \({H^ + }\)ions and thus the acid’s strength are determined by the extent of dissociation (or ionisation). As a result, the degree to which an acid dissociates or ionises is proportional to its acidic strength (stronger acids have lower pH values).

What do All Acids and all Bases have in common

Introduction

The most important class of compounds in chemistry are acids and bases. Acids and bases are essential to practically every natural system, including human survival and the functioning of rocks and oceans. You must have come across acid and bases when you tasted lemon or washed your hands with soaps. Acids are sour and can be dangerously corrosive; bases are slippery and can be corrosive as well. In science, compounds are typically categorized as bases, acids, or neutral. The pH scale is used to determine how strong an acid or base is.

lead magnet

Acids

1. Acids release hydrogen ions or a proton when combined with water.

2. They exhibit a pH below 7 and turn blue litmus red. 

The pH scale is useful for determining a substance's acidity or basicity.

3. Arrhenius state that “those substances which give hydrogen ions \({H^ + }\) in aqueous solution” are known acids.

\[HA{\rm{ }} + {\rm{ }}{H_2}O{\rm{ }} \to {\rm{ }}{A^ – } + {\rm{ }}{H_3}{O^ + }\]

4. The common acids which we can use in the laboratory are—Hydrochloric acid (HCl), Nitric acid (\(HN{O_3}\)) and Sulphuric acid (\({H_2}S{O_4}\)).

Uses of Acids

AcidUses
Sulphuric Acid, H2SO4Used as solvent
Formic Acids, HCOOHUsed for tanning and dyeing
Hydrochloric Acid, HClUsed as Cleaner
Benzoic Acid, C6H5COOHUsed as food preservatives and in dyeing
Nitric Acid, HNO3Used in Fertilizer, dyes, and plastics

Bases

1. Bases are substances that release hydroxyl ions when combined with water to form an aqueous solution. 

2. They exhibit a pH level above 7 and turn red litmus to blue. 

3. A base has a basic group that separates in an aqueous media or a dissociable hydroxyl group (Arrhenius base). 

4. Metal hydroxides are mostly basic and rapidly produce hydroxyl ions in an aqueous solution. The majority of basic hydroxides are formed by alkali metals and a few alkaline earth metals.

\[BOH\left( {aq} \right){\rm{ }} \to {\rm{ }}{B^ + }\left( {aq} \right){\rm{ }} + {\rm{ }}O{H^ – }\left( {aq} \right)\;\]

5. Sodium hydroxide, potassium hydroxide, and ammonium hydroxide are some examples of bases. 

Uses of Bases

BasesUses
Potassium Hydroxide, KOHSoaps and Batteries
Ammonia NH3Fertilizer
Calcium Hydroxide, Ca(OH)2Mortar and Plaster
Magnesium Hydroxide, Mg(OH)2Detergent
Sodium Carbonate Na2CO3Detergent
lead magnet

Properties of Acids and Bases

PropertiesAcidBase
TasteSourBitter
pH valueless than 7greater than 7
Electric conductivityGood conductorGood conductor
Test with litmus paperTurn red litmus to blue.Turns blue litmus to red.
TouchSlippery

The similarity between an acid and a base

1. They both react with litmus.

2. They both are compounds

3. Likewise, they both release ions in their solution

4. Forms salt and water when combined. For example, when Ammonium hydroxide reacts with Hydrochloric acid, it gives Ammonium Chloride. 

\[N{H_4}OH{\rm{ }}\left( {aq} \right)\;{\rm{ }} + {\rm{ }}HCl\left( {aq} \right)\;\, \to {\rm{ }}N{H_4}Cl{\rm{ }}\left( s \right){\rm{ }} + {H_2}O{\rm{ }}\left( l \right)\]

Summary

Acidic substances are usually identified by their sour taste. An acid is a molecule which can donate an \({H^ + }\) ion and can remain energetically favourable after a loss of \({H^ + }\). Acids are known to turn blue litmus red.

Bases, on the other hand, are characterized by a bitter taste and a slippery texture. A base that can be dissolved in water is referred to as an alkali. When these substances chemically react with acids, they yield salts. Bases are known to turn red litmus blue.

Frequently Asked Questions

1. Which acid or base, when dissolved in water, releases hydroxyl ions?

Ans. Bases are chemicals that dissolve in water to produce hydroxyl ions, or \(O{H^ – }\), and are also referred to as alkalis.

2. What kind of salt is produced when a strong acid reacts with a weak base?

Ans. The salts are known as acidic salts because they are formed when strong acids and weak bases react. Every salt has a pH that is under 7. Similar to this, many salts’ aqueous solutions have a pH of 7 and are naturally neutral.

3. Which has a sour taste between acid and base?

Ans. Bases have a bitter taste, while acids have a sour taste. Acid always has a pH value lower than 7, which causes it to turn blue litmus paper red.